TSOP48 NAND 360 (Type B) Adapter
An adapter for the FlashcatUSB xPort 1.X to read/write TSOP48 NAND flash memory using the TSOP48 360 Clip. It does not support the new xPort 2.0.
Each board is made to order so it may take me week or so to ship them, depending on how long it takes me to get the parts.
The clip adapters are all designed to work with the FlashcatUSB xPort 1.X made by EmbeddedComputers, on that webpage is a list of the NAND and NOR flashes it supports. It does not support the new xPort 2.0.
- 2x 24-pin 2mm Pin Headers
- 16x 2.54mm Pin Headers
- 2.54mm Terminal Block
- 2.54mm Jumper
It uses buffers in order to supply a “signal boost” on the same signals that I “boosted” on my other boards.
Using a jumper the power source can be switched between using power from the FlashcatUSB xPort to using power from an external power source. At the end of the board you can put pins which you can use to supply power from an external power source, there is also a footprint for a capacitor if you need it for your setup. The capacitor footprint is for a capacitor with 2mm lead spacing, something like this should work.
Works with PS3 NANDs.